Download Sp1 For Windows 7 64 Bit UPDATED

Download Sp1 For Windows 7 64 Bit

Support for Windows 7 ended on January fourteen, 2020

Nosotros recommend yous move to a Windows eleven PC to continue to receive security updates from Microsoft.

Larn more

The recommended (and easiest) style to get SP1 is to plough on automatic updating in Windows Update in Control Panel and wait for Windows 7 to notify y'all that SP1 is ready to install. It takes most 30 minutes to install, and you'll need to restart your computer almost halfway through the installation.

To cheque if Windows seven SP1 is already installed on your PC, select the Kickoff push button, right-click Computer, and then select Properties.

If Service Pack ane is listed under Windows edition, SP1 is already installed on your PC.

Before you lot begin

Check if your PC is 32-bit or 64-fleck

Yous'll need to know if your PC is running a 32-bit (x86) or 64-flake (x64) version of Windows seven. Select the Get-go button, right-click Reckoner, and and then select Backdrop. The version of Windows 7 is displayed next to Organization type.

Disk infinite requirements

Cheque to make sure your PC has enough costless disk space to install SP1.

Installation method	Estimated amount of free disk space needed
Windows update	x86-based (32-chip): 750 MB x64-based (64-fleck): 1050 MB
Downloading SP1 from the Microsoft website	x86-based (32-flake): 4100 MB x64-based (64-bit): 7400 MB

Dorsum up important files

Information technology's a good idea to support your important files, photos, and videos to an external hard disk drive, USB flash bulldoze, or the cloud before installing the update.

Plug in and connect to the Internet

Make sure your PC is plugged in to power and y'all're connected to the Internet.

Disable antivirus software

Some antivirus software might prevent SP1 from installing or tedious down the installation. Yous can temporarily disable your antivirus software before the installation. If you exercise and so, make sure yous're aware of the risks that might be involved and re-enable the antivirus software as presently as SP1 is done installing.

Installing Windows 7 SP1 using Windows Update (recommended)

If your PC is set up to automatically install updates, you lot'll be prompted past Windows Update to install SP1. Follow the instructions to install the update.

To manually install SP1 from Windows Update:

1. Select the Starting time push > All programs > Windows Update.

2. In the left pane, select Check for updates.

3. If any important updates are found, select the link to view bachelor updates. In the list of updates, select Service Pack for Microsoft Windows (KB976932) and and so select OK.
   

   Note:If SP1 isn't listed, yous might need to install some other updates before installing SP1. Install whatever of import updates and then follow these steps again to check for SP1.

4. Select Install updates.  Yous might be asked for an admin countersign or to confirm your option.

5. Follow the instructions to install SP1.

6. Later SP1 is installed, sign in to your PC. You might see a notification indicating whether the update was successful. If you disabled your antivirus software before the installation, make certain you turn it dorsum on.

Downloading and installing Windows SP1 from the Microsoft Download Middle

If you're unable to install SP1 from Windows Update, you can download the installation package from the Microsoft Download Center and so install SP1 manually.

1. Go to the Windows seven Service Pack 1 download page on the Microsoft website.

2. Select Install Instructions to see which packages are available for download, and make note of the one that you demand.

3. Select the advisable language from the drop-down list, and and so select Download.

4. Select the packages y'all demand to install, select Next, and and so follow the instructions to install SP1. Your PC might restart a few times during the installation.

5. Afterward SP1 is installed, sign in to your PC. You might see a notification indicating whether the update was successful. If you lot disabled your antivirus software before the installation, brand sure you plow it dorsum on.

Troubleshoot issues installing Windows SP1

If you try to install SP1 and see an mistake message that the installation wasn't successful, this might be because there's a problem with the Windows Servicing Shop that is used to install updates or because your antivirus software is preventing the update from being installed.

To try and gear up the trouble, follow these steps and then endeavor to install SP1 again.

Download and run the System Update Readiness Tool

1. Select the link in the table that corresponds with the version of Windows running on your PC.
   

   Windows version	Link to Microsoft Download Center
   Windows 7 32-fleck (x86)	Download
   Windows 7 64-scrap (x64)	Download

   On the Microsoft Download Center page, select your language then select Download. It might take a few minutes for the tool to download and install.

2. To install the tool immediately, select Open up or Run and so follow the instructions. To apply the tool afterwards, select Relieve and download the installation files to your PC.

3. On the Windows Update Standalone Installer screen, select Aye or OK.

4. On the Installation complete screen, select Close.

5. Effort installing the service pack once again.

Run the Windows Update troubleshooter

If your PC isn't able to find or install updates, the Windows Update troubleshooter might be able to fix the problem.

1. Select the Start button, and so select Control Panel.

2. In the search box, enter troubleshooter and so select Troubleshooting from the list of results.

3. Nether Organisation and Security, select Fix issues with Windows Update and then follow the instructions.

4. Later the troubleshooter is done, try installing the service pack over again.

Need more than help?

DOWNLOAD HERE

Posted by: givenshiphar.blogspot.com